On the mathematics behind rolling hashes and anti-hash tests

Правка en1, от dacin21, 2018-07-05 19:33:32

This blog assumes the reader is familiar with the basic concept of rolling hashes. There are some math-heavy parts, but one can get most of the ideas without understanding every detail.

The main focus of this blog is on how to choose the rolling-hash parameters to avoid getting hacked and on how to hack codes with poorly chosen parameters.

Designing hard-to-hack rolling hashes

Recap on rolling hashes and collisions

Recall that a rolling hash has two parameters (p, a) where p is the modulo and 0 ≤ a < p the base. (We'll see that p should be a big prime and a larger than the size of the alphabet.) The hash value of a string S = s0... sn - 1 is given by

For now, lets consider the simple problem of: given two strings S, T of equal length, decide whether they're equal by comparing their hash values h(S), h(T). Out algorithm declares S and T to be equal iff h(S) = h(T). Most rolling hash solutions are built on multiple calls to this subproblem or rely on the correctness of such calls.

Let's call two strings S, T of equal length with S ≠ T and h(S) = h(T) an equal-length collision. We want to avoid equal-length collisions, as they cause out algorithm to incorrectly assesses S and T as equal. (Note that our algorithms never incorrectly assesses strings a different.) For fixed parameters and reasonably small length, there are many more strings than possible hash-values, so there always are equal-length collisions. Hence you might think that, for any rolling hash, there are inputs for which it is guaranteed to fail.

Luckily, randomization comes to the rescue. Our algorithm does not have to fix (p, a), it can randomly pick then according to some scheme instead. A scheme is reliable if we can prove that for arbitrary two string S, T, S ≠ T the scheme picks (p, a) such that h(S) ≠ h(T) with high probability. Note that the probability space only includes the random choices done inside the scheme; the input (S, T) is arbitrary, fixed and not necessarily random. (If you think of the input coming from a hack, then this means that no matter what the input is, our solution will not fail with high probability.)

I'll show you two reliable schemes. (Note that just because a scheme is reliable does not mean that your implementation is good. Some care has to be taken with the random number generator that is used.)

Randomizing base

This part is based on a blog by rng_58. His post covers a more general hashing problem and is worth checking out.

This scheme uses a fixed prime p (i.e. 109 + 7) and picks a uniformly at random from . Let A be a random variable for the choice of a.

To prove that this scheme is good, consider two strings (S, T) of equal length and do some calculations

Note that the left-hand side, let's call it called P(A), is a polynomial of degree  ≤ n - 1 in A. P is non-zero as S ≠ T. The calculations show that h(S) = h(T) if and only if A is a root of P(A).

As p is prime and we are doing computations , we are working in a field. Over a field, any polynomial of degree  ≤ n - 1 has at most n - 1 roots. Hence there are at most n - 1 choices of a that lead to h(S) = h(T). Therefore

So for any two strings (S, T) of equal length, the probability that they form an equal-length collision is at most . This is around 10 - 4 for n = 105, p = 109 + 7.

Tightness of bound

The bound for this scheme is actually tight if . Consider and with

P(A) = An - 1 - 1

As p is prime, is cyclic of order p - 1, hence there is a subgroup of order n - 1. Any then satisfies gn - 1 = 1, so P(A) has n - 1 distinct roots.

Randomizing modulo

This scheme fixes a base and a bound N > a and picks a prime p uniformly at random from [N, 2N - 1].

To prove that this scheme is good, again, consider two strings (S, T) of equal length and do some calculations

As , . As we chose a large enough, X ≠ 0. Moreover . An upper bound for the number of distinct prime divisors of X in [N, 2N - 1] is given by . By the prime density theorem, there are around primes in [N, 2N - 1]. Therefore

Note that this bound is slightly worse than the one for randomizing the base. It is around 3·10 - 4 for n = 105, a = 26, N = 109.

How to randomize properly

The following are good ways of initializing your random number generator.

  • high precision time.
    chrono::duration_cast<chrono::nanoseconds>(chrono::high_resolution_clock::now().time_since_epoch()).count();
    chrono::duration_cast<chrono::nanoseconds>(chrono::steady_clock::now().time_since_epoch()).count();

Either of the two should be fine. (In theory, high_resolution_clock should be better, but it somehow has lower precision than steady_clock on codeforces??)

  • processor cycle count
    __builtin_ia32_rdtsc();
  • some heap address
    make_unique<char>().get() - (char*)nullptr;

If you use a C++11-style rng, you can use a combination of the above

    seed_seq seq{
        (uint64_t) chrono::duration_cast<chrono::nanoseconds>(chrono::high_resolution_clock::now().time_since_epoch()).count(),
        (uint64_t) __builtin_ia32_rdtsc(),
        (uint64_t) (make_unique<char>().get() - (char*)nullptr)
    };
    mt19937 rng(seq);
    int base = uniform_int_distribution<int>(2, p-1)(rng);

Note that this does discard the upper 32 bits from the arguments and that this doesn't really matter, as the lower bits are harder to predict (especially in the first case with chrono.).

See the section on 'Abusing bad randomization' for some bad examples.

Extension to multiple hashes

We can use multiple hashes (Even with the same scheme and same fixed parameters) and the hashes are independent so long as the random samples are independent. If the single hashes fail with probability at most α1, ..., αk, the probability that all hashes fail is at most .

For example, if we use two hashes with p = 109 + 7 and randomized base, the probability of a collision is at most 10 - 8; for four hashes it is at most 10 - 16.

Larger modulos

Using larger (i.e. 60 bit) primes would make collision less likely and not suffer from the accumulated factor of n in the error bounds. However, the computation of the rolling hash gets slower and more difficult, as there is no __int128 on codeforces.

Note that p = 264 (overflow of unsigned long long) is not prime and can be hacked regardless of randomization (see below).

Extension to multiple comparisons

Usually, rolling hashes are used in more than a single comparison. If we rely on m comparison and the probability that a single comparison fails is p then the probability that any of the fail is at most m·p by a union bound. Note that when m = 105, we need at least two or three hashes for this to be small.

One has to be quite careful when estimating the number comparison we need to succeed. If we sort the hashes or put them into a set, we need to have pair-wise distinct hashes, so for n string a total of comparisons have to succeed. If n = 3·105, m ≈ 4.5·109, so we need four hashes.

Extension to strings of different length

If we deal with strings of different length, we can avoid comparing them by storing the length along the hash. This is not necessarily however, if we assume that no character hashes to 0. In that case, we can simple imagine we prepend the shorter strings with null-bytes to get strings of equal length without changing the hash values. Then the theory above applies just fine. (If some character (i.e. 'a') hashes to 0, we might produce strings that look the same but aren't the same in the prepending process (i.e. 'a' and 'aa').)

Computing anti-hash tests

This section cover some technique that take advantage of common mistakes in hash-implementations and can mainly be used for hacking other solutions.

Single hashes

Hashing with unsigned overflow (p = 264, q arbitrary)

One anti-hash test that works for any base is the Thue–Morse sequence, generated by the following code.

code

See this blog for a detailed discussion.

Hashing with 32-bit prime and fixed base (p < 232 fixed, q fixed)

Hashes with a single small prime can be attacked via the birthday paradox. Fix a length l, let and pick k strings of length l uniformly at random. If l is not to small, the resulting hash values will approximately be uniformly distributed. By the birthday paradox, the probability that all of our picked strings hash to different values is

Hence with probability we found two strings hashing to the same value. By repeating this, we can find an equal-length collision with high probability in . In practice, the resulting strings can be quite small (length ).

More generally, we can compute m strings with equal hash-value in using the same technique with .

Multiple hashes

Credit for this part goes to ifsmirnov, I found this technique in his jngen library.

Using two or more hashes is usually sufficient to protect from a direct birthday-attack. For two primes, there are N = p1·p2 possible hash values. The birthday-attack runs in , which is  ≈ 1010 for primes around 109. Moreover, the memory usage is more than bytes (If you only store the hashes and the rng-seed), which is around 9.5 GB.

The key idea used to break multiple hashes is to break them one-by-one.

  • First find an equal-length collision (by birthday-attack) for the first hash h1, i.e. two strings S, T of equal length with h1(S) = h1(T). Note that strings of equal length built over the alphabet S, T will hash to the same value under h1.
  • Then use S and T as the alphabet when searching for an equal-length collision (by birthday-attack again) for the second hash h2. The result will automatically be a collision for h1 as well, as we used S, T as the alphabet.

This reduces the runtime . Note that this also works for combinations of a 30-bit prime hash and a hash mod 264 if we use the Thue–Morse sequence in place of the second birthday attack.

Another thing to note is that string length grows rapidly in the number of hashes. (Around , the alphabet size is reduced to 2 after the first birthday-attack.) If we search for more than 2 strings with equal hash value in the intermediate steps, the alphabet size will be bigger, leading to shorter strings, but the runtime of the birthday-attacks gets slower ( for 3 strings, for example.).

Abusing bad randomization

On codeforces, quite a lot of people randomize their hashes. (Un-)Fortunately, many of them do it an a suboptimal way. This section covers some of the ways people screw up their hash randomizations and ways to hack their code.

This section applies more generally to any type of randomized algorithm in an environment where other participants can hack your solutions.

Fixed seed

If the seed of the rng is fixed, it always produces the same sequence of random numbers. You can just run the code to see which numbers get randomly generated and then find an anti-hash test for those numbers.

Picking from a small pool of bases (rand() % 100)

Note that rand() % 100 produced at most 100 distinct values (0, ..., 99). We can just find a separate anti-hash test for every one of them and then combine the tests into a single one. (The way your combine tests is problem-specific, but it works for most of the problems.)

More issues with rand()

On codeforces, rand() produces only 15-bit values, so at most 215 different values. While it may take a while to run 215 birthday-attacks (estimated 111 minutes for p = 109 + 7 using a single thread on my laptop), this can cause some big issues with some other randomized algorithms.

In C++11 you can use mt19937 and uniform_int_distribution instead.

Low-precision time (Time(NULL))

Time(NULL) only changes once per second. This can be exploited as follows

  1. Pick a timespan Δ T.
  2. Find an upper bound T for the time you'll need to generate your tests.
  3. Figure out the current value T0 of Time(NULL) via custom invocation.
  4. For t = 0, ..., Δ T - 1, replace Time(NULL) with T0 + T + t and generate an anti-test for this fixed seed.
  5. Submit the hack at time T0 + T.

If your hack gets executed within the next Δ t seconds, Time(NULL) will be a value for which you generated an anti-test, so the solution will fail.

Random device on MinGW (std::random_device)

Note that on codeforces specifically, std::random_device is deterministic and will produce the same sequence of numbers. Solutions using it can be hacked just like fixed seed solutions.

Notes

  • If I made a mistake or typo or something is unclear, please comment.
  • If you have your own hash randomization scheme, way of seeding the rng or anti-hash algorithm that you want to discuss, feel free to comment on it bellow.
  • I was inspired to write this blog after the open hacking phase of round #494 (problem F). During (and after) the hacking phase I figured out how to hack many solution that I didn't know how to hack beforehand. I (un-)fortunately had to go to bed a few hours in (UTC + 2), so quite a few hackable solutions passed.
Теги rolling hashes, math, string

История

 
 
 
 
Правки
 
 
  Rev. Язык Кто Когда Δ Комментарий
en10 Английский dacin21 2018-07-10 22:34:13 51 BKP -> BKZ
en9 Английский dacin21 2018-07-10 21:51:26 6760 Added lattice-reduction attack.
en8 Английский dacin21 2018-07-08 15:37:15 8926 Added tree attacks and a summary table.
en7 Английский dacin21 2018-07-07 22:20:41 1121 Added note on using p=2^{61}-1. Fixed some typos.
en6 Английский dacin21 2018-07-06 21:50:19 161
en5 Английский dacin21 2018-07-06 19:17:18 611
en4 Английский dacin21 2018-07-05 23:04:34 422 (published)
en3 Английский dacin21 2018-07-05 21:15:58 15
en2 Английский dacin21 2018-07-05 21:15:21 643
en1 Английский dacin21 2018-07-05 19:33:32 16547 Initial revision (saved to drafts)